The Online Monitor plays an important role in the field of industrial monitoring, used a large number of cases, from the continuous steady-state operation of steam turbine, turbine and compressor to the various conditions of rolling mill, belt conveyor. Online monitoring system can continuously provide very short interval monitoring data in order to predict the sudden change of equipment state, provide 24x7 protection. With dedicated diagnosis system, it can give the analysis and suggestion for the equipment abnormal, guide the maintenance personnel to find root cause and make correction, reduce abnormal downtime and prolong service life of the equipment.

MS1000 has 6 modules corresponding to different monitoring requirements, according to the distribution of field equipment, can be any combination. otherwise main control module is used to dispatch acquisition task, generate reliable alarm and transmit raw data and alarm events to the web architecture software system, so that users can quickly analyze and respond. With the process state signal entry from the automation system, it can realize the accurate condition collection, and support the diagnosis of various working conditions.

Chasis Case BBA7
Dimension 270mm (W) x 185mm (D) x 220mm (H)
Weight 2080g
Combination 2 slots for Power module and Communication Module, 5 slots for dedicated data acquisition module
Power Module PMB-AC220
Dimension 270mm (W) x 185mm (D) x 220mm (H)
Weight 617g
Operating Power

Input: 85~264V AC / 50-60Hz / 1.5A

Output: ±5V Analog, 3.3V Digital

Communication Module MCMBZ-A
Dimension 30mm (W) x 175mm (D) x 180mm (H)
Weight 480g
Data Storage 256MB Flash
Indicator Various LED indicating function (Running, Alarm, Commnunication, etc.)
Operating Environment -20 ~ 70℃
EMC CE Certification (with EMC, LVD certification)
Communication Port Ethernet RJ45 x1 10MB / 100MB Auto Adaptive
RS422 2Mbps x1, for acquisition data exchanging
RS485 115.2Kbps x2
Condition Signal Exchange RPM Input 2 channel, 30~18000RPM, ±30V (0: <1V, 1: >3V)
RPM Output 1 channel, same as RPM input
0/1 Signal Input 2 channel, ±30V (0: <1V, 1: >3V)
0/1 Signal Output 2 channel, 200V / 60W (Relay output)
Acquisition Module SMB4A10xx SMB4V10xx SMB4SH8Kxxx SMB4AD101K SMB4D-A SMB8TA-A
Dimension 30mm (W) x 175mm (D) x 180mm (H)
Weight 504g
Data Storage 4MB Flash
Indicator Various LED indicating function (Running, Alarm, Commnunication, etc.)
Operating Environment -20 ~ 70℃
EMC CE Certification (with EMC, LVD certification)
Data Acquisition Parameters
Measured Signal Input
Acceleration
(4 channel)
Velocity
(4 channel)
Shock Energy
(4 channel)
Shaft Orbit
    (2 channel)
Shaft Position
    (2 channel)
Shaft Position
(4 channel)
4-20mA
(8 channel)
Acquistion Mode Simultaneous Polling
A/D Convert 16bits of precision
Measuring Accuracy ±5% or ±2 Characters, take the larger value

AC: ±5% or ±2 Characters

DC: ±0.003mm

±1%
Measuring Range
0~200.00m/s²(Peak)
(Sensitivity 100mV/g)
0~200.00mm/s(RMS)
(Sensitivity 100mV/g)
0~200.00m/s²(Peak)
(Sensitivity 100mV/g)
Shaft Orbit: 0mm~5mm
    (Sensitivity 1V/mm)
Shaft Position: -24V~24V
    (Depends on Sensor)
4~20mA
Frequency Band
Min. 10Hz
Max. 5KHz, 2KHz
1kHz(Default)
Min. 10Hz
Max. 2KHz, 1kHz (Default)
500Hz, 200Hz
HPF: 8KHz
DC ~ 200Hz / 1KHz
10Hz ~ 1kHz
SPS(Line Resolution) 4K(1600)
1K(400, Default)
2K(800), 4K(1600)
8K(3200) Shaft Orbit: 4K(1600) 128
Condition Signal Exchange RPM Input 2 channel, 30~18000RPM, ±30V (0: <1V, 1: >3V)
RPM Output 1 channel, same as RPM input 1 channel, same as RPM input
0/1 Signal Input 2 channel, ±30V (0: <1V, 1: >3V)
DC Power Output 24V 200mA (2 channel total)
5V 200mA (1 channel) / 200mA (1 channel)
Communication Parameters
RS422 2Mbps x1, for acquisition data exchanging